How do I reset my Cisco ASA 5505 password?

      Comments Off on How do I reset my Cisco ASA 5505 password?

How do I reset my Cisco ASA 5505 password?

Reset Password in Cisco ASA Firewall

  1. Step 1: Login to Cisco ASA device with console cable and reboot the device.
  2. Step 2: Press ‘ESC’ key or ‘BREAK’ key on the keyboard to break the boot process.
  3. Step 3: Now, here is the trick.
  4. Step 4: Reboot the device.
  5. Step 5: When the ASA is booted, it will not ask for password.

How do I reset my Cisco ASA 5510 to factory settings?

Resetting a Cisco ASA 5510 to Factory Defaults

  1. Connect your console cable and make sure you can see the command prompt for the ASA – even if you can’t log in.
  2. Power cycle the appliance – flick the power switch on the front off and on again.

How do I reset my ASA password?

To recover passwords, perform the following steps:

  1. Console into the ASA.
  2. Reboot the ASA.
  3. Press the escape key during reboot to enter ROMMON.
  4. Tell the firewall to ignore the startup config on next reload: rommon #1> confreg.

What is the default Cisco ASA password?

blank
By default, the password is blank, and you can press the Enter key to continue.

How do I remove ASA startup config?

With [ciscoasa# write erase] you will erase configuration file in flash startup-configuration. After this use reload on ASA. You will get cleared ASA configuration file, without DHCP Server any interface configured no ip addresses or NAT as you will get with factory default restart.

Is Cisco phasing out Asa 5505?

there has not been any announcement for phasing out Cisco ASA 5505, it is not in the pipeline as of now. But if you want to work on the new ASA models, that should definitely help you and give you an edge in the longer run.

Can the ASA 5505 span a port?

Span/mirror port on the ASA 5505 – The ASA 5505 has an eight port Ethernet switch in it making it unique among the ASA product line. Like all Cisco switches, this one also supports traffic span to allow you to capture packets and send them to a destination switchport for analysis.

What is the Cisco ASA?

The ASA in Cisco ASA stands for Adaptive Security Appliance. In brief, Cisco ASA is a security device that combines firewall, antivirus , intrusion prevention , and virtual private network ( VPN ) capabilities.

What is an ASA router?

The ASA is a purpose built security device while the ISR is a router. The primary focus of the ASA is security implementation including stateful inspection of traffic and very sophisticated inspection of traffic passing through the ASA. It has some (limited) ability to do layer 3 routing of packets.